向日葵视频ios下载安装

 National Service Hotline 136-6578-2166

189-3829-0275

The deep hole drilling machine is a special machine tool for deep hole processing with high precision, high efficiency and high automation. Depending on the hole processing technology (gun drill, BTA drill, jet suction drill, etc.), through a continuous drilling, the machining accuracy and surface roughness can be reached by drilling, expanding and reaming. Let's take a look at how to do well in deep hole drilling machine.
 
1, keep the deep hole drilling machine and accessories neat and clean.
 
2, knives, tools, fixtures and neatness.
 
3, deep hole drilling machine operating room door switch, anti-collision switch and other insurance cover installation should be put into operation normally, not to be disassembled at will.
 
4, every time the power switch is connected to the switchgear, check whether the output voltage of the regulator is 380V, whether the three-phase is balanced or not, and if there is any exception, it is not allowed to connect the power supply of the machine tool.
 
5. Every day before drilling holes, you need to run warm up programs. If necessary, it is necessary to move the machine axis 3 to 5 times with a full stroke.
 
6, check the lube oil level every day, replenish it in time, use ISO68 guide rail lubricating oil, and observe the ground every day if there is any leakage.
 
7, weekly check the pressure of the hydraulic station is normal, pressure 2MPA, check the oil level of the cooling oil tank once a week, whether the filter paper is enough, pay attention to make up for it.
 
8, every two months, clean the motor back cover, cabinet air conditioner, dust on the refrigerator protection net, and liquidate the cooling oil in the fuel tank, and observe the oil pressure of the outlet pump carefully.

Fixed word: 189-3829-0275 Fax: 0769-81090104
Dongguan Li Kun CNC Co., Ltd.
Miss Lin: 189-3829-0275
Mr. Luo: 136-6578-2166
No. 1, Chau Tun old road, Changping Town, Dongguan
Copyright 0. 2010-2018 Dongguan City Kun CNC Co., Ltd. all rights reserved.
LINKS