向日葵视频ios下载安装

 National Service Hotline 136-6578-2166

189-3829-0275

Deep hole drill manufacturers teach you how to correctly use and maintain CNC deep hole drill.


The use and maintenance of NC deep hole drill directly affect the service life of NC deep hole drill. Therefore, how to correctly use and maintain CNC deep hole drill is very important.
 
1. protect CNC deep hole drilling machine, keep NC deep hole drilling machine and accessories neat and clean.
 
2. knives, tools, fixtures and neatly placed.
 
3. numerical control deep hole drilling machine operating room door switch, anti-collision switch and other safety protection devices should be put into operation normally, and it is not allowed to be disassembled at will.
 
4. before switching on the power switch of the cabinet, check whether the output voltage of the regulator is 380V, whether the three-phase is balanced or not. If there is any exception, it is not allowed to connect the power supply of the machine tool.
 
5. daily warming procedures are required before drilling holes. If necessary, all journeys should be moved 3 to 5 times of each axis to lubricate the guide.
 
6. check the lube oil level every day and replenish it with ISO68 guide rail.
 
7. go to work every day to see if there are any oil stains on the ground.
 
8. check the pressure of the hydraulic station once a week. The pressure is 2MPA.
 
9. check the oil level of the cooling oil tank once a week and whether the filter paper is enough.
 
10. clean the motor back cover, cabinet air conditioner and refrigerator protection net every two months.
 
11. regularly remove the impurities in the cooling oil return tank, and observe the oil pressure at the outlet of the return pump.
 
12. regularly smear oil on machine cover to prevent raw embroidery and excessive friction injuries.
 
      13. at least six months to do a large CNC deep hole drilling machine maintenance, including checking whether the rail is worn, whether the motor is abnormal, whether the NC deep hole drilling machine is protected and the function of the anti-collision switch is normal, whether the cable of the moving part is worn, whether there are dust and other anomalies in the main cabinet, and whether the external control circuit is completely normal (such as oil level switch, oil circuit control). System function, whether the oil circuit joint is loose, whether the balance chain is loose or not. No cotton wool should be used for wiping rail.

 

Fixed word: 189-3829-0275 Fax: 0769-81090104
Dongguan Li Kun CNC Co., Ltd.
Miss Lin: 189-3829-0275
Mr. Luo: 136-6578-2166
No. 1, Chau Tun old road, Changping Town, Dongguan
Copyright 0. 2010-2018 Dongguan City Kun CNC Co., Ltd. all rights reserved.
LINKS