向日葵视频ios下载安装

 National Service Hotline 136-6578-2166

189-3829-0275

What are the precautions for correct operation of deep hole drilling?

Recently, many customers complained, "why did I buy a deep hole in less than a month?" in fact, the reason for these problems is that people do not understand the correct operation, cause errors in the work, and affect the quality and performance of the machine. So, what are the aspects of operation of deep hole drilling?
1. operators must not wear gloves for machine operation, and oil stains on their hands are not allowed to operate machine tool panels.
2. follow the correct switching sequence. Generally speaking, when the power is switched on, wait for the system to start the screen to start completely, then eliminate the alarm and start the machine tool. When the machine is shut down, the machine tool should be stopped at the right place before switching off the power switch of the cabinet. ,
3. every time the machine starts, every axis needs to be carefully observed to see if there is any foreign matter affecting the smooth movement of the machine tool, and whether there are any missing gadgets or other articles in the working area. If the check is normal, you can operate the reference point.
4. the distance between the guide sleeve and the workpiece surface can be adjusted to ensure that the guide sleeve is in a very suitable position when the drill sleeve is ejecting, so once the drill hits the workpiece, it will likely cause damage. And make sure that each screw of the worktable and the bending plate is fixed tightened.

When operating deep hole drilling, workers need to carefully inspect various components to prevent failures.

Fixed word: 189-3829-0275 Fax: 0769-81090104
Dongguan Li Kun CNC Co., Ltd.
Miss Lin: 189-3829-0275
Mr. Luo: 136-6578-2166
No. 1, Chau Tun old road, Changping Town, Dongguan
Copyright 0. 2010-2018 Dongguan City Kun CNC Co., Ltd. all rights reserved. ICP 20056248, Guangdong
LINKS